Skip to command documentation
Device onlynetworkdevicesession scope
^WX

Configure Wireless Securities

^WX configures configure Wireless Securities. It applies to the printer session and subsequent formats and controls printer hardware or connectivity rather than label pixels.

ZPLr compatibility note

  • Recognized by the renderer but has no label-raster effect.

These are code examples only. This printer or session command does not produce a standalone label image.

Syntax
^WXa,b,c,d,e,f,g,h,i,j,k,l,m,n
a

Security type

Sets security type. It can be omitted when the documented default is suitable.

Default
01
Range
1–15
Required
No
Documented values010203040506070809101112131415PSK

a variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison3 variations

a = 01

Uses 01 for security type while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-a-1.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

a = 02

Uses 02 for security type while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-a-2.zpl
^WX02,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

a = PSK

Uses PSK for security type while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-a-3.zpl
^WXPSK,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0
b

WEP encryption index*

Sets wEP encryption index*. It can be omitted when the documented default is suitable.

Default
1
Required
No
Documented values1234

b variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison3 variations

b = 1

Uses 1 for wEP encryption index* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-b-1.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

b = 2

Uses 2 for wEP encryption index* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-b-2.zpl
^WX01,2,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

b = 4

Uses 4 for wEP encryption index* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-b-3.zpl
^WX01,4,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0
c

WEP authentication type*

Sets wEP authentication type*. It can be omitted when the documented default is suitable.

Default
O
Required
No
Documented valuesOS

c variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison2 variations

c = O

Uses O for wEP authentication type* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-c-1.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

c = S

Uses S for wEP authentication type* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-c-2.zpl
^WX01,1,S,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0
d

WEP key type*

Sets wEP key type*. It can be omitted when the documented default is suitable.

Default
S
Required
No
Documented valuesSH

d variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison2 variations

d = H

Uses H for wEP key type* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-d-1.zpl
^WX01,1,O,H,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

d = S

Uses S for wEP key type* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-d-2.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0
e

Encryption key 1

Sets encryption key 1. It can be omitted when the documented default is suitable.

Default
None
Required
No
Documented valuesKEY0

e variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison2 variations

e = KEY

Uses KEY for encryption key 1 while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-e-1.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

e = 0

Uses 0 for encryption key 1 while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-e-2.zpl
^WX01,1,O,S,0,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0
f

Encryption key 2

Sets encryption key 2. It can be omitted when the documented default is suitable.

Default
None
Required
No
Documented valuesKEY0

f variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison2 variations

f = KEY

Uses KEY for encryption key 2 while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-f-1.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

f = 0

Uses 0 for encryption key 2 while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-f-2.zpl
^WX01,1,O,S,KEY,0,KEY,KEY,user,0000,0000,kerberos,krbtgt,0
g

Encryption key 3

Sets encryption key 3. It can be omitted when the documented default is suitable.

Default
None
Required
No
Documented valuesKEY0

g variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison2 variations

g = KEY

Uses KEY for encryption key 3 while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-g-1.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

g = 0

Uses 0 for encryption key 3 while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-g-2.zpl
^WX01,1,O,S,KEY,KEY,0,KEY,user,0000,0000,kerberos,krbtgt,0
h

Encryption key 4

Sets encryption key 4. It can be omitted when the documented default is suitable.

Default
None
Required
No
Documented valuesKEY0

h variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison2 variations

h = KEY

Uses KEY for encryption key 4 while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-h-1.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

h = 0

Uses 0 for encryption key 4 while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-h-2.zpl
^WX01,1,O,S,KEY,KEY,KEY,0,user,0000,0000,kerberos,krbtgt,0
i

User ID*

Sets user ID*. It can be omitted when the documented default is suitable.

Default
user
Required
No
Documented valuesusertext

i variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison2 variations

i = user

Uses user for user ID* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-i-1.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

i = text

Uses text for user ID* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-i-2.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,text,0000,0000,kerberos,krbtgt,0
j

Password*

Sets password*. It can be omitted when the documented default is suitable.

Default
password
Required
No
Documented values0000

j variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison2 variations

j = 0000

Uses 0000 for password* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-j-1.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

j = 1

Uses 1 for password* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-j-2.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,1,0000,kerberos,krbtgt,0
k

Optional private key password*

Sets optional private key password*. It can be omitted when the documented default is suitable.

Default
None
Required
No
Documented values0000

k variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison2 variations

k = 0000

Uses 0000 for optional private key password* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-k-1.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

k = 1

Uses 1 for optional private key password* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-k-2.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,1,kerberos,krbtgt,0
l

Realm*

Sets realm*. It can be omitted when the documented default is suitable.

Default
kerberos
Required
No
Documented valueskerberos0

l variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison2 variations

l = kerberos

Uses kerberos for realm* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-l-1.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

l = 0

Uses 0 for realm* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-l-2.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,0,krbtgt,0
m

Key Distribution Center (KDC)*

Sets key Distribution Center (KDC)*. It can be omitted when the documented default is suitable.

Default
krbtgt"
Required
No
Documented valueskrbtgt0

m variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison2 variations

m = krbtgt

Uses krbtgt for key Distribution Center (KDC)* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-m-1.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

m = 0

Uses 0 for key Distribution Center (KDC)* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-m-2.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,0,0
n

Pre-Shared Key (PSK) value*

Sets pre-Shared Key (PSK) value*. It can be omitted when the documented default is suitable.

Default
None
Required
No
Documented values0

n variations

Compare values side by side; other parameters remain at representative defaults.

Side-by-side comparison2 variations

n = 0

Uses 0 for pre-Shared Key (PSK) value* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-n-1.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,0

n = 1

Uses 1 for pre-Shared Key (PSK) value* while the other command values stay at representative defaults.

Edit in editor
ZPLcaret-wx-n-2.zpl
^WX01,1,O,S,KEY,KEY,KEY,KEY,user,0000,0000,kerberos,krbtgt,1

Primary source

Official Zebra reference

Use the manufacturer reference for printer- and firmware-specific behavior beyond ZPLr’s pinned rendering profile.

Open Zebra documentation